The Linear 12-24V Gate Receiver is designed for use in gate operatorapplications. An 11-inch wire whip antenna is included for local reception.The whip antenna connects to the receiver’s Type-F antenna connector. Alsoincluded is a 3-foot coax cable and a bulkhead connector for remotely mountingthe whip antenna in installations where the receiver is mounted inside ashielded metal enclosure, such as a gate operator housing. An external Model106603 Remote Whip Antenna can also be used with this receiver. The Receiveris a dual frequency receiver. An internal jumper selects either 300 MHz or 310MHz operating frequency. The 300 MHz frequency is compatible with standardMulti-Code transmitters, the 310 MHz frequency is compatible with the Stanleyversion Multi-Code transmitters. The operator supplies 12-24 volt power to thereceiver, or the receiver can be powered by a separate AC power transformer orDC power supply. The normally open relay output can switch up to 1 amp at 30VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided forattachment to the gate operator’s radio activation terminals. The receiver isprogrammed with a coding switch. When a transmitter set to the same code isactivated, the receiver’s output will activate, triggering the gate operator.FEATURES: Operates on 12-24 volts AC or DC power. Whip antenna. 3-foot antennacoax and bulkhead connector. 1,024 codes. RF frequency: 300 MHz or 310 MHz(jumper selectable). TYPE: 1-Channel. NOTE: This Gate Receiver is compatiblewith Multi-Code and Stanley transmitters only.
